6″ Stainless Steel Submersible Pumps
Salient Features
- Better efficiency by high discharge and low power consumption.
- Pumps are available with NEMA standards.
- Pumps have good resistance against sand and silt.
- Maximum reliability as a result of 100% high-grade stainless steel inside and outside of the pumps.
- “Our Pumps are made out of stainless steel sheet metal which results in low friction loss, high pump overall efficiency & low operating cost in low friction loss, high pump overall efficiency & low operating cost”
- Low noise operation and low maintenance.
- Due to stainless steel construction, pumps have a very good wear resistance.
Application
- Cooling Water Transport
- Ground water Supply
- Fire Fighting
- Irrigation System
- Sprinkler Installation
- Marine Application
- Water Treatment
PRODUCT RANGE | |
Suitable for Borewell size | 6″ and Above |
Suitable Power Rating | 0.5 to 3.0 Hp, 50Hz, 1 Phase |
Rated Speed | 2880 rpm |
Stage | 1 – 60 |
Head Range | 4 – 670 Meter 13 – 2198 Feet |
Discharge Range | 78 – 4 M³/hr 1300 – 67 LPM |
Delivery Size | 2½” , 3″ , 4″ |
Available Models | QR12, QR14A, QR17, QR30, QR46, QR60 |
MATERIAL OF CONSTRUCTION | |
Component | Material |
Delivery Casing | AISI 304 / CF8 |
Diffuser | AISI 304 |
Impeller | AISI 304 |
Bearing | NBR |
Neck ring | NBR |
Pump Shaft | AISI 431 |
Strainer | AISI 304 |
Coupling | AISI 304 |
Suction Casing | AISI 304 / CF8 |
