6” Submersible Motors
Salient Features
- Motor manufactured in ISO 9001 certified manufacturing facility
- High Efficient electrical design and low operation cost
- All Motors Pre filled and 100% Tested
- Strong & Robust Construction to survive any site condition
- A special Diaphragm ensures pressure compensation inside the motor
- Water lubricated thrust and radial bearings enable a maintenance free operation
- Cooling material according to drinking water regulations
- Motor mounting with NEMA & Non NEMA standard
Application
- Field Irrigation
- Private / Public water supply
- Flow / Drip / Sprinkler irrigation
- High rise building & Fire fighter
PRODUCT RANGE | |
Particular | Three Phase |
KW / HP | 4/10.0 – 30.0/40.0 |
Volt | 380/415 220/380/460 |
Insulation class | Y Class as per IS 1271 |
Degree of Protection | IP68 |
Type of Duty | S1 |
Electrical Winding | WET type Rewindable |
Ambient Temperature | 45˚c |
Starts per hour | 20 |
Minimum Cooling Flow | 0.5 m/s |
Available MOC | Cast Iron / AISI 304 |
MATERIAL OF CONSTRUCTION | |||
Component | S4 Design | S3 Design | |
Cast Iron | Stainless Steel 304 | Cast Iron | |
Stator Body / Shell | Stainless Steel | AISI 304 | Stainless Steel |
Connection Piece | C.I. FG200 IS 210 | AISI 304 | C.I. FG200 IS 210 |
Upper Housing | C.I. FG200 IS 210 | AISI 304 | Cast Iron |
Lower Housing | C.I. FG200 IS 210 | AISI 304 | Cast Iron |
Base Cover | C.I. FG200 IS 210 | AISI 304 | C.I. FG200 IS 210 |
Winding Wire | PVC / PP | PVC / PP | PVC / PP |
Thrust Bearing Segment | AISI 420 | AISI 420 | AISI 420 |
Rotor Shaft | Stainless Steel | Stainless Steel | Stainless Steel |
Shaft END | Stainless Steel | AISI 630 | Stainless Steel |
Shaft Seal | Ceramic / Carbon | Ceramic / Carbon | Oil Seal |
Bearing Bush | Graphite Carbon | Graphite Carbon | Graphite Carbon / LTB5 |
Diaphragm | NBR | NBR | NBR |
Lead Cable | Rubber / PVC | Rubber / PVC | Rubber / PVC |
Sand Guard | NBR | NBR | NBR |
Hardware | Stainless Steel 304 | Stainless Steel 304 | Stainless Steel 304 |
