4” Submersible Motor – Water Filled
Salient Features
- High Efficient electrical design and low operation cost.
- All Motors are filled and 100% Tested.
- Strong & Robust Construction to survive any site condition.
- A special Diaphragm ensures pressure compensation inside the motor.
- Water lubricated thrust and radial bearings enable a maintenance-free operation.
- Cooling material according to drinking water regulations.
- Motor manufactured in ISO 9001 certified manufacturing facility.
- Motor mounting with NEMA & Non-NEMA standards.
Application
- Field Irrigation
- Private / Public water supply
- Flow / Drip / Sprinkler irrigation
- High rise building & Fire fighter
PRODUCT RANGE | ||
Particular | Single Phase | Three Phase |
KW / HP | 0.37/0.50 – 2.2/3.0 | 0.37/0.50 – 5.5/7.5 |
Volt | 230 | 380/415 220/380/460 |
Insulation class | Y Class as per IS 1271 | Y Class as per IS 1271 |
Degree of Protection | IP68 | IP68 |
Type of Duty | S1 | S1 |
Electrical Winding | WET type Rewindable | WET type Rewindable |
Ambient Temperature | 45˚c | 45˚c |
Starts per hour | 20 | 20 |
Minimum Cooling Flow | 0.2 m/s | 0.2 m/s |
Available MOC | Cast Iron / AISI 304 | Cast Iron / AISI 304 |
MATERIAL OF CONSTRUCTION | ||
Component | Cast Iron | Stainless Steel 304 |
Stator Body / Shell | Stainless Steel | AISI 304 |
Connection Piece | C.I. FG200 IS 210 | AISI 304 |
Lower Housing | C.I. FG200 IS 210 | AISI 304 |
Base Cover | C.I. FG200 IS 210 | AISI 304 |
Winding Wire | PVC / PP | PVC / PP |
Thrust Bearing Segment | AISI 420 | AISI 420 |
Rotor Shaft | Stainless Steel | Stainless steel |
Shaft END | Stainless Steel | AISI 630 |
Shaft Seal | Lip Seal NBR | Lip Seal NBR |
Bearing Bush | Graphite Carbon / LTB5 | Graphite Carbon |
Diaphragm | NBR | NBR |
Lead Cable | Rubber / PVC | Rubber / PVC |
Sand Guard | NBR | NBR |
Hardware | Stainless Steel | Stainless Steel 304 |
