10” Submersible Motors
Salient Features
- High Efficient electrical design and low operation cost
- All Motors Pre filled and 100% Tested
- Strong & Robust Construction to survive any site condition
- A special Diaphragm ensures pressure compensation inside the motor
- Water lubricated thrust and radial bearings enable a maintenance free operation
- Cooling material according to drinking water regulations
- Motor manufactured in ISO 9001 certified manufacturing facility
- Motor mounting with NEMA & Non NEMA standard
Application
- Field Irrigation
- Private / Public water supply
- Flow / Drip / Sprinkler irrigation
- High rise building & Fire fighter
PRODUCT RANGE | |
Characteristics | Three Phase |
KW / HP | 60.0/80.0 – 93.0/125.0 |
Volt | 380/415 220/380/460 |
Insulation class | Y Class as per IS 1271 |
Degree of Protection | IP68 |
Type of Duty | S1 |
Electrical Winding | WET type Rewindable |
Ambient Temperature | 45˚c |
Starts per hour | 10 |
Minimum Cooling Flow | 0.5 m/s |
Available MOC | Cast Iron |
MATERIAL OF CONSTRUCTION | |
Component | Cast Iron |
Stator Body / Shell | Stainless Steel |
Connection Piece | C.I. FG200 IS 210 |
Upper Housing | C.I. FG200 IS 210 |
Lower Housing | C.I. FG200 IS 210 |
Base Cover | C.I. FG200 IS 210 |
Winding Wire | PVC / PP |
Thrust Bearing Segment | AISI 420 |
Rotor Shaft | AISI 410 |
Shaft END | Stainless Steel |
Shaft Seal | Oil Seal / Ceramic / Carbon |
Bearing Bush | Graphite Carbon / LTB5 |
Diaphragm | NBR |
Lead Cable | Rubber / PVC |
Sand Guard | NBR |
Hardware | Stainless Steel 304 |
